Toshiba e-Studio 120 Коды ошибок

  • Code: E7-02
  • Description: HSYNC not detected.
  • Causes: LSU (laser diode, reception element, APC circuit) trouble
    LSU drive circuit (ASIC) trouble
  • Code: E7-10
  • Description: CCD black level trouble
  • Causes: CCD drive circuit (CCD PWB, ASIC, harness) trouble
  • Code: E7-11
  • Description: CCD white level trouble
  • Causes: CCD drive circuit (CCD PWB, ASIC harness) trouble
    Copy lamp lighting trouble (Copy lamp, invertor PWB)
  • Code: E7-12
  • Description: Shading trouble (White correction)
  • Causes: Dirt on white plate for scanning white level
  • Code: E7-16
  • Description: Abnormal output of laser
  • Causes: LSU (laser diode, reception element, APC circuit) trouble
    LSU drive circuit (ASIC) trouble
  • Code: F5-02
  • Description: Copy lamp disconnection trouble
  • Causes: Copy lamp or copy lamp drive circuit (invertor PWB) trouble
    Copy lamp disconnection
  • Code: H2-00
  • Description: Thermistor open detection
  • Causes: The fusing thermistor is open.
  • Code: H3-00
  • Description: Heat roller abnormally high temperature
  • Causes: The fusing temperature rises above 240°C.
  • Code: H4-00
  • Description: Heat roller abnormally low temperature
  • Causes: The fusing temperature does not reach 185°C within 27sec of turning on the power, or the fusing temperature keeps at 140°C.
  • Code: L1-00
  • Description: Feeding is not completed within the specified time after starting feeding.
  • Causes: When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn OFF. Or when the mirror base is fed for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn OFF.
  • Code: L3-00
  • Description: Return is not completed within the specified time.
  • Causes: When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn ON.
  • Code: L4-01
  • Description: Main motor lock
  • Causes: When the main motor encoder pulse is not detected for 100msec.
  • Code: L6-10
  • Description: Polygon motor lock
  • Causes: The lock signal (specified rpm signal) does not return within a certain time (about 20sec) from starting the polygon motor rotation
  • Code: U2-01
  • Description: Counter sum check error
  • Causes: When the counter check sum value stored in the EEPROM is abnormal.
  • Code: U2-04
  • Description: EEPROM serial communication error
  • Causes: When a communication trouble occurs with the EEPROM.

МФУ SHARP
МФУ TOSHIBA
BCP TOSHIBA
Совместимые картриджи G&G

Поиск по каталогу:

Наименование


Empty cart
Корзина пуста

 МЫ ПРЕДЛАГАЕМ СПЕЦИАЛЬНЫЕ УСЛОВИЯ СОТРУДНИЧЕСТВА ДЛЯ КОРПОРАТИВНЫХ КЛИЕНТОВ И СЕРВИСНЫХ ЦЕНТРОВ